Set Up Your Trio Wireless Charger With Magnetic Pad
By Satechi® | Apple and PC Electronic Accessories | Published: 2026-10-22
Category: How-to Guides
Learn how to set up the Satechi Trio Wireless Charger With Magnetic Pad for your iPhone, Apple Watch, and AirPods. Follow these steps for optimal placement and fast charging.
Quick Answer
Plug in the charger, place your iPhone on the magnetic pad, your Apple Watch on the watch charger, and your AirPods case on the designated spot. Align each device properly for the fastest charge.
Why Placement Matters for Multi-Device Charging
The Trio Wireless Charger With Magnetic Pad uses three separate charging zones. Each zone has a specific coil position, so placing a device off-center can slow charging or stop it entirely. The magnetic pad for your iPhone helps with alignment, but the Apple Watch and AirPods zones require careful positioning.
Step-by-Step Setup Guide
- Connect the Charger to Power: Use the included USB-C cable and a power adapter that supplies at least 18W (not included). Plug the cable into the charger and the adapter into a wall outlet. A common mistake is using a low-power adapter, which will slow charging or prevent the watch charger from working.
- Place Your iPhone on the Magnetic Pad: Align the back of your iPhone 12 or newer with the raised magnetic pad. The magnets will snap it into the correct position. For non-MagSafe iPhones or Android devices, center the device on the pad manually. A common mistake is leaving a thick case on that blocks the magnetic connection, causing slow charging. Check that your iPhone's case is MagSafe-compatible or remove it for best results.
- Position Your Apple Watch on the Charger: Place your Apple Watch face-up on the dedicated watch charger zone (the raised circular area). The watch should sit flat and centered. A common mistake is placing the watch upside down or off-center, which prevents charging. The watch charger works with all Apple Watch models from Series 3 onward. If the watch doesn't start charging, rotate it slightly until you see the green lightning bolt.
- Set Your AirPods Case on the Charging Spot: Place your AirPods Pro or AirPods with wireless charging case on the marked area at the base of the charger. The case should be centered and flat. A common mistake is using a non-wireless AirPods case, which won't charge. The charger supports Qi-enabled cases only. Check that the LED on your AirPods case lights up to confirm charging.
- Check Charging Status for All Devices: Look for charging indicators on each device: the iPhone shows a battery icon, the Apple Watch shows a green lightning bolt, and the AirPods case shows an amber or green LED. If any device isn't charging, adjust its position. A common mistake is assuming all devices charge at the same speed; the magnetic pad offers faster charging for iPhones, while the watch and AirPods charge at standard rates. For fastest iPhone charging, ensure the magnetic pad is properly aligned and use a 20W or higher adapter.
Product Facts
- Trio Wireless Charger With Magnetic Pad: The Trio Wireless Charger With Magnetic Pad simplifies wireless charging with a convenient place for all your devices. You can charge your iPhone, Apple Watch, and AirPods Pro simultaneously without managing multiple cables.

Trio Wireless Charger With Magnetic Pad
